Meteoro

STANDARD GUIDE · INVIAS 2013

INVIAS granular base: BG-40, BG-38, BG-27 and BG-25 gradations

INVIAS 2013, Article 330, defines four gradation bands for granular base: the coarse gradations BG-40 and BG-27 and the fine BG-38 and BG-25. On the No. 200 sieve the coarse require 0-9 % and the fine 5-15 %, and the share passing No. 200 must not exceed 2/3 of the share passing No. 40.

These are the requirements of the standard. Compliance of each material and each shipment is proven with its tests; ask for them when you request a quote.

Gradation bands · Table 330-3

INVIAS 2013, Table 330-3. Granular base gradation bands, % passing
Gradation typeBand1½" (37.5 mm)1" (25.0 mm)3/4" (19.0 mm)3/8" (9.5 mm)No. 4 (4.75 mm)No. 10 (2.00 mm)No. 40 (0.425 mm)No. 200 (0.075 mm)
Coarse gradationBG-4010075-10065-9045-6830-5015-327-200-9
Coarse gradationBG-27-10075-10052-7835-5920-408-220-9
Fine gradationBG-3810070-10060-9045-7530-6020-4510-305-15
Fine gradationBG-25-10070-10050-8035-6520-4510-305-15

Tolerances (±): 0 % on 1½"; 7 % from 1" to 3/8"; 6 % from No. 4 to No. 40; 3 % on No. 200.

Source: Instituto Nacional de Vías (INVIAS). Especificaciones Generales de Construcción de Carreteras, 2013. Capítulo 3, Artículo 330 (Base granular), Tabla 330-3. Check the edition in force and the one your contract requires; INVIAS published a 2022 edition.

No. 200 / No. 40 ratio and maximum size

the ratio between the percentage passing the 75 μm (No. 200) sieve and the percentage passing the 425 μm (No. 40) sieve shall not exceed 2/3, and the nominal maximum size shall not exceed 1/3 of the compacted layer thickness.

Translation. Original text in Spanish:

la relación entre el porcentaje que pasa el tamiz de 75 μm (No. 200) y el porcentaje que pasa el tamiz de 425 μm (No. 40), no deberá exceder de 2/3 y el tamaño máximo nominal no deberá exceder de 1/3 del espesor de la capa compactada.

Source: Instituto Nacional de Vías (INVIAS). Especificaciones Generales de Construcción de Carreteras, 2013. Capítulo 3, Artículo 330 (Base granular), Tabla 330-3. Check the edition in force and the one your contract requires; INVIAS published a 2022 edition.

Questions on INVIAS granular base

Which granular base gradations does INVIAS define?

Four bands: the coarse gradations BG-40 and BG-27 and the fine gradations BG-38 and BG-25 (INVIAS 2013, Table 330-3). BG-40 and BG-38 pass 100 % through the 1½" (37.5 mm) sieve; BG-27 and BG-25 pass 100 % through the 1" (25.0 mm). These are the requirements of the standard. Compliance of each material and each shipment is proven with its tests; ask for them when you request a quote.

What is the difference between coarse and fine granular base gradation?

On the No. 200 (0.075 mm) sieve the coarse BG-40 and BG-27 require 0-9 % and the fine BG-38 and BG-25 require 5-15 %. On the No. 40 (0.425 mm) the coarse require 7-20 % and 8-22 % and the fine 10-30 % (INVIAS 2013, Table 330-3). These are the requirements of the standard. Compliance of each material and each shipment is proven with its tests; ask for them when you request a quote.

What is the difference between BG-40 and BG-27?

BG-40 passes 100 % through the 1½" (37.5 mm) sieve and 75-100 % through the 1" (25.0 mm); BG-27 passes 100 % through the 1" and 75-100 % through the 3/4" (19.0 mm). Both require 0-9 % on the No. 200 (INVIAS 2013, Table 330-3). These are the requirements of the standard. Compliance of each material and each shipment is proven with its tests; ask for them when you request a quote.

What No. 200 to No. 40 ratio does INVIAS require for granular base?

INVIAS 2013, Article 330 (translation): "the ratio between the percentage passing the 75 μm (No. 200) sieve and the percentage passing the 425 μm (No. 40) sieve shall not exceed 2/3, and the nominal maximum size shall not exceed 1/3 of the compacted layer thickness." These are the requirements of the standard. Compliance of each material and each shipment is proven with its tests; ask for them when you request a quote.

What gradation tolerances does granular base allow?

Tolerances (±): 0 % on 1½"; 7 % from 1" to 3/8"; 6 % from No. 4 to No. 40; 3 % on No. 200. (INVIAS 2013, Table 330-3). These are the requirements of the standard. Compliance of each material and each shipment is proven with its tests; ask for them when you request a quote.

What is the difference between granular base and subbase under INVIAS?

INVIAS 2013 covers granular subbase in Article 320, with bands SBG-50 and SBG-38, and granular base in Article 330, with bands BG-40, BG-27, BG-38 and BG-25. On the No. 200 (0.075 mm) sieve the subbase requires 2-15 %, coarse base 0-9 % and fine base 5-15 %. These are the requirements of the standard. Compliance of each material and each shipment is proven with its tests; ask for them when you request a quote.

Base data sheets

Quote on WhatsApp → · Catalog by specification →